Daima Kalitenin ve Profesyonelin yanında!...
Copyright 2007. Tüm hakları saklıdır. Created by Tarık Taşkıran
İtalya'dan Dünya'ya uzanan dev Encoder üreticisi
Lika Electronic
C100 Heavy Duty Ağır koşullar için Enkoder
- Ağır Çalışma koşullarına uygun
- Konik 17mm Delik Milli
- 2,5kV'luk elektriksel şaft izolasyonu
- 350N yatay, 140N düşey yük dayanımı
- Tuz'a karşı korumalı dış yapı
- 2500Puls'a kadar
Leine Linde encoder
wing generator
rüzgar jeneratörleri için encoder
rüzgar enerjisi
Hübner
Model 800 Series (Heavy duty)
When the most robust, maintenance-free and cost-effective pulse encoder solution is sought after, the encoders in the Model 800 Series are the first choice of the majority of designers. The optional ADS™ (Advanced Diagnostic System) is a built-in system used for condition-based or preventative maintenance, guaranteeing the reliability of the application. Demanding environments and electrically or mechanically stressful installations are circumstances the encoders in the Model 800 Series are often exposed to and for which they are well-protected. Accessories and ready-made design solutions meant to guarantee operation and increase service life which reduce the total cost of the application are also offered as options for the encoder series.
Heavy Duty incremental encoder
High vibration and shock resistance
according to IEC 68-2-6 and IEC 68-2-27
Electrically insulated up to 2.5kV
IP 66, encapsulation class according to
IEC 60529
3 or 6 short-circuit protected outputs
9...30 Vdc or 5 Vdc
Incremental encoders
HOG 9.2
HOG 9.2 DN
Voltage supply / signals
I 9...30 VDC / output level
HTL with inverted signals
TTL 5 VDC / output level TTL
with inverted signals
R 9...30 VDC / output level
TTL with inverted signals
See part number (pulses)
Output signals
DN K1, K2, K0
Part number (pulses)
100 250 512 1024 2500
120 300 600 1042
180 360 720 1200
192 400 900 1250
200 500 1000 2048
Accessories
Torque arm
Cable HEK 8 and plugs
HENQ 1100
Analyzer for encoders
Function control with EMS (Enhanced Monitoring System)
End shaft max. ø12-16 mm or cone shaft ø17 mm (1:10)
Resolution 100...2500 pulses
